P8030
fingerprint lock is a fully automatic smart fingerprint lock packed with multiple advanced technologies for your home, intelligent community and office.Suitable for wooden doors, security doors, and metal doors, P8030 is equipped with C-class safe and intelligent cylinder intended to resist cutting, smashing, prying and other attempts at theft.
1-2:Features
1. Unlocking modes: fingerprint, key card, mechanical key, password, ekey authorized in WeChat mini program and remote unlocking through mobile APP.
2. Semiconductor fingerprint reader: semiconductor biometric recognition of less than 0.5 seconds.
3. Surface finish: electroplating.
4. Theft & prank prevention function: The system generates an alarm and triggers the two-minute lockout after 5 straight wrong inputs.
5. Scramble PIN code: The password is composed of 6 digits or more, and fuzzy password input is supported. That is, you may input numbers randomly before and after the correct password to unlock.
6. Emergency cylinder: C-class cylinder.
7. Low voltage alarm: When the battery voltage is lower than 7.2 V, it alarms each time upon unlocking. And you can still unlock for about 200 more times, and after that, you cannot unlock, so be sure to charge or replace the battery before reaching the limit.
8. Unlocking records can be checked.
9. Combined unlocking: If it is enabled, you must enter two types of user information to unlock.
10. Single unlocking is supported.
11. You can enable or disable the voice prompt based on your needs.
1-3:System Configuration
1. 0.96-inch OLED LCD screen with narrow bezel.
2. Touch keypad with 12 + 2 keys: 12 white keyboard LEDs + doorbell key - one -press locking key. There are two keys on the rear panel: one-press unlocking and locking keys.
3. Capacity: 200 sets of fingerprint + password +card (You can set a virtual password before and after your password), including 9 sets for administrator (ID: 001-009), 181 sets for common users (ID: 010-190), and 10 sets for temporary users (ID: 191-200).
4. Doorbell: Electric doorbell.
1 -4:Technical Specifications
, Material: zinc alloy
, Operating voltage: DC 8.4 V
, Emergency cylinder: C-class cylinder
, Thumb turn function: fully automatic electronic thumb turn
• Fingerprint reader: semiconductor biometric recognition of less than 0.5 seconds.
• Quiescent current: < 80 pA
, Operating current: < 600 mA
, Batteries: rechargeable lithium battery
, Low battery voltage alarm: < 7.2 V
, Sensor resolution: V500 dip
• Control system: Single circuit
, Capacity: 200 sets (fingerprint + password + key card)
• Power consumption at power-on of networking module: 120 to 140 mA
• Door handing: adjustable
, Setting mode: voice navigation
, Card reading distance: < 10mm
, Screen: 0.96-inch OLED LCD screen
, Resolution: 160 x 160 pixels
• Keys: 12 touch keys and 2 physical keys
, Unlocking records: 300 pieces
• Operating temperature: -20℃ to 60℃
• Operating humidity: < 80%
, Door thickness: 40 to 110 mm
, Voice prompt: Chinese/English
, Scramble PIN code: 16-digit anti-peeping scramble PIN code. With the IC card, an electronic key user can be added
Appearance